Server Room Security Cages Stafford

Billington Safety Systems supplied and installed a number of server room security cages and mesh partitions, using the building walls on 2 sides to enclose the backs of the cages and complete the security cage. The cages were fixed to the raised floor, as the air conditioning system and cabling run underneath it.

The mesh size on this project was 50mm x 50mm, but it can also be done in 25mm x 25mm or expanded metal, depending on your requirements and security cage needs.

The standard height of the cages is 2.44m, but again this can be changed to suit the products you are storing. We can do 3.05m and 3.66m high cages as standard, and the panels can be double stacked and fixed to each other to go even higher.

The security cage doors were supplied as standard 1.8m wide x 2.02m high double doors with a digital code locking system, but these can be changed for a hasp and staple or 3 lever locks, or supplied with brackets for access control.

The cages were installed in Stafford by 2 men in 1 day and finished in our standard light grey BS00A05. Other standard colours are available, as well as special colours.