Safety Barriers

Pedestrian Safety Barriers

A Barrier System designed to create safe pedestrian areas both on ground and on mezzanine floors.

The barrier is a safety feature to prevent personnel walking into restricted areas, where there may be dangerous machinery.

The handrails are bolted directly to the posts with M8 x 60mm bolts, the posts are bolted to a concrete floor with M12 Anchor bolts. M12 Bolts and nuts are used if attached to chipboard such as used on a mezzanine floors.

 Technical Information

Standard Height: 900mm, 1100mm and 1500mm
Standard Width: Depends on customers requirements
Barrier Rail: 40mm x 40mm x 3mm RHS
Vertical Posts: 40mm x 40mm x 3mm RHS
Base Plates: 100mm x 180mm x 120mm drilled to accept a M12 Anchor Bolt
Corner Posts: 40mm x 40mm x 3mm RHS
Standard Colour Finishes: Yellow RAL 1018, Grey BS00A05 and Sandstone BS08B17
Construction: Vertical posts are rolled steel hollow section mig welded to heavy base plates. Corner posts and rails are rolled steel hollow section with plastic end caps for all exposed ares.

We offer a full fitting service on all our products.

Double Safety Barrier System

A light Duty Protective barrier system designed to protect racking, shelving and partitioning in warehouses from damage caused by forklift trucks, pallet trucks etc. The system can be upgraded to medium duty by using the double barrier railed system.
The system rails are produced from pre -galvanised material and they also have high visibility end caps to help determine the end of the barrier rails.
The barrier rails are mounted directly to the posts, which in turn are fixed to floor with M12 Anchor bolts.

Technical Information

Standard Length: 3000mm
Standard Height: 600mm
Barrier Rails: 150mm x 40mm x 3mm x 3000mm long
Posts: 80mm x 40mm x 3mm x 60mm long
Base Plates: 120mm x 140mm x 10mm
Corner Posts: 75mm x 75mm x 6mm x 600mm high
Standard Finishes: Galvanised, Yellow RAL 1018, Grey BS00A05 and Sandstone BS08B17
Construction: Vertical posts are rolled steel hollow section mig welded to heavy base plates. Corner posts and rails are rolled steel hollow section with plastic end caps for all exposed ares.

We offer a full fitting service on all our products.