Double Skin Partitioning

Our double skin steel partitions system gives a smooth finish to both sides of the partition, with minimal joints, ideally suited to works offices, clean rooms and storage areas for chemicals and food products

Double skin steel partitioning systems can be designed to work as security areas & factory dividing walls where people require alternative access.

The panels sit directly into a floor channel, the floor channel is secured to the floor before you can erect the partitioning, the panels are slotted in the floor channel, and a header channel is also fitted to give the systems extra support and strength. The system is quick and easy to construct and comes standard with high-performance single, double doors and hospital-type door sets. Doors can be supplied with single or double-glazed vision panels or flush i.e. no vision panel.

Panels are constructed of steel sheets with a 50mm high density Rockwool slab infill. Panels are connected by means of an internal section making the installation very quick and simple. The internal panel connection offers additional rigidity and a wireway facility. The panels are supplied as either all solid with no windows, single glazed, double glazed and also with flush double glazing on the inside and out.

Another thing about these double skin partitions is their noise reduction capabilities. Get in touch with Billington Safety Systems today for more information on our steel partitioning systems. Whether you are planning to use them for storage areas or something else, our double skin steel partitioning is perfect for your warehouse.

Sliding doors or automatically operated doors are also available.

Glass: Glass retained with steel glazing bead and glazing foam. 6.4mm laminate as standard. Toughened glass and perspex can be supplied on request.

Standard Panel Sizes:

Height: 2400mm, 2700mm, 3000mm, none standard heights can be manufactured to suit your needs

Panel thickness: 50mm

Posts: – These are designed into the partitioning as needed as 2 way, 3 way and corner junctions: the posts are 50mm x 50mm RHS or 100mm x 50mm RHS with base plates, as necessary.

Paint Finish: Finished In standard Light grey, or light beige, but we can powder coat in a special colour upon request.

Tell us about your project